Grundfos Oxiperm Pro Chlorine Dioxide Generator OCD-162-30-P/G1
This Grundfos Oxiperm Pro Chlorine Dioxide Generator OCD-162-30-P/G1 is a compact, pre mounted generation and dosing system for chlorine dioxide according to sodium chlorite / hydrochloric acid method, with chemicals-saving and corrosion-protective 1:1 mixture ratio.
The system is equipped with microprocessor control and an integrated measuring amplifier. Therefore, the chlorine dioxide solution can be optionally dosed proportional to flow or measurement controlled. Input comes from either a contact water meter or a continuous signal from a water meter and a chlorine dioxide measuring cell.
The compact design of the system as floor-standing unit enables easy use, and safe, reliable operation.
Front installation of all system components makes the maintenance fast and less expensive.
Only 7.5 weight-% sodium chlorite solution acc. to DIN EN 938 and 9 weight-% hydrochloric acid acc. to DIN EN 939 shall be used.
A corrosion resistant injection point must be used to reduce the risk of corrosion in the installation system. As an alternative, the optional bypass mixing module from Grundfos is available.
The unit can be supplied, as an option, with an external chlorine dioxide batch tank for additional peak demand.
ClO2 generation system in floor-standing rack. Two pre-assembled suction lines. Mounting material. Protective cover.
Free UK delivery on all Grundfos productx
Click here to see the full range of Grundfos Chlorine Dioxide Generators
